4 Hole, 90° Fitting - EG (P1325)
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.

4 Hole, 90° Fitting - EG (P1325)

Available: In Stock
$3.50
UNISTRUT P1325 4H 90D ANGLE FITTING

Technical Description:
Corner Angle Type, ASTM A575/A576/A570/A635/A36 Grade 33 Steel Material, Hot Rolled Pickled Oiled Process, 78 lb Per 100 Pieces Weight, 4 Hole(S)

UPC: 78636400783

Part Number: P1325

Note: 
Both ends of beam must be supported. Load data is based on a P1010 nut and 1/2" bolt. Safety factor = 2.5 based on ultimate strength of connection. 
When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

UNISTRUT P1325 4H 90D ANGLE FITTING

Technical Description:
Corner Angle Type, ASTM A575/A576/A570/A635/A36 Grade 33 Steel Material, Hot Rolled Pickled Oiled Process, 78 lb Per 100 Pieces Weight, 4 Hole(S)

UPC: 78636400783

Part Number: P1325

Note: 
Both ends of beam must be supported. Load data is based on a P1010 nut and 1/2" bolt. Safety factor = 2.5 based on ultimate strength of connection. 
When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Standard Dimensions (Unless Shown Otherwise on Drawing):

  • Hole Diameter: 9/16" (14mm)
  • Hole Spacing (From End): 13/16" (21mm)
  • Hole Spacing (On-Center): 1 7/8" (48mm)
  • Width: 1 5/8" (41mm)
  • Thickness: 1/4" (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45
  • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
  • PROCRAFT Supply is here to help

    If you don't see what you are looking for please contact us at our toll free number: 888 587-5540

    We want to help in any way we can! You can also contact us via email at shop@procraftsupply.com