Description
The Powersoft Mezzo 604 AD packs the same levels of reliability, build quality, and acoustic proprieties of any Powersoft amplifier platform, in half the size. The versatile, "AD" versions of Mezzo provide all the remote control and monitoring functions of the "A" versions but extend networking capabilities further with Dante and AES67. With the included mounting kit and small design, you can mount the Mezzo 604 AD just about anywhere.
MyPowersoft services are available for this product.
Powersoft Mezzo 604 AD Includes:
- Mezzo 604 AD
Powersoft Mezzo 604 AD Features:
- Multiple mounting options
- Auto-Setup
- Power-sharing
- Full remote control via 3rd party controls
Powersoft Mezzo 604 AD Specifications:
- Channel Handling
- Number of output channels: 4 (Euro 5 mm)
- Line level outputs: -
- Dante/AES67 output channels: 4 (AD versions only)
- Balanced inputs channels: 4 (Euro 3.8 mm)
- Unbalanced inputs channels: 2 (stereo mini-jack)
- In parallel with inputs 1 & 2
- Dante/AES67 input channels: 4 - max 2 flows (AD versions only)
- Audio
- Gain: 17 dB - 47 dB (0.1 dB increments)
- S/N (20 Hz - 20 kHz @ 8 Ω) analog input DanteTM/AES67 input →2dB better: >102 dB dB(A)
- Input sensitivity: 4 dBu (balanced) | -10 dBV (unbalanced)
- Max input level: 18 dBu / 6.16 VRMS
- Frequency Response @ 8 Ω: 20Hz – 20kHz +/-0.5 dB
- Crosstalk (1 kHz): -60dB
- Input impedance: 10KΩ to GND / 20kΩ balanced
- CMRR (Typ.): 60 dB
- DSP
- AD converters: 24 Bit @ 48 kHz 125 dB-A Dynamic Range - 0.00x % THD+N
- DA converters: 24 Bit @ 48 kHz 115 dB-A Dynamic Range - 0.00x % THD+N
- Internal precision: 32 bit floating point
- Wake up time (from sleep): 2s
- Latency: 2.5 ms fixed latency architecture
- Delay: 100ms (per output) for time alignment
- Equalizer: Parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass,
- band-stop
- Crossover: Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 24 dB/oct (IIR).
- High pass filter: A 12 dB Butterworth high pass is automatically set based on the impedance response in the auto setup
- Limiters: RMS voltage, Peak limiter
- Load monitoring: Triggered impedance sweep, average impedance and pilot tone monitoring.
- Construction
- Dimensions: 210 x 275 x 40 mm
- Weight: 2.6 kg
- Output Stage
- Commercial total rated power: 600 W
- Maximum output power
- per channel @ 100 V (symmetrical)*: 125 W
- per channel @ 70 V (symmetrical)*: 150 W
- per channel @ 25 V (symmetrical)*: 150 W
- per channel @ 16 Ω (symmetrical)*: 150 W
- per channel @ 8 Ω (symmetrical)*: 150 W
- per channel @ 4 Ω (symmetrical)*: 150 W
- per channel @ 2 Ω (symmetrical)*: 150 W
- Maximum power sharing capacity per channel
- per channel @ 100 V (asymmetrical)**: 500 W
- per channel @ 70 V (asymmetrical)**: 600 W
- per channel @ 8 Ω (asymmetrical)**: 600 W
- per channel @ 4 Ω (asymmetrical)**: 400 W
- Maximum unclipped output voltage: 142 Vpeak
- Maximum output current: 15.6 Apeak (overcurrent protection @ 18.7 Apeak)
- *Available by driving and loading all the channels symmetrically.
- **Maximum assignable per channel and the result of the auto-setup
- Power
- Idle Power: 21 W
- Power supply: Universal regulated switch mode with PFC, SRM
- Nominal voltage (±10%): 100-240 VAC @ 50-60Hz
- Operating Voltage: 90-264 VAC @ 50/60 Hz
- AC Mains connector: IEC 10A
- Cooling & fan noise
- Forced cooled - Front to back
- Average output power capacity with fans not moving: 4 W
- Whisper mode: 8 W (26 dBA)
- Max power: 41 dBA
- Networking
- Network: 2 x RJ45 Fast Ethernet
- Network modes:
- Switched: Both ports connected with an integrated switch. Supports forwarding of gigabit traffic.
- Split: One port for control/monitoring, 1 port for audio
| WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |