Beam Clamp
- Product SKU: P2785-EG
- Category: Structural Materials, Unistrut
Technical Description:
1000 lb Per Pair Load Capacity. For attaching support strut channel to beams, use only in pairs.
Right angle type, 3/4 inch max jaw capacity. Fittings unless noted, are made from hot-rolled, pickled and oiled steep plates, strip, or coil. The fitting steel also meets the physical requirements of ASTM A1011 SS GR 33. The pickling of the steel produces a surface that is smooth and free from scale.
UPC: 78636401214
Part Number: P2785
Notes:
Only use in pairs. Safety factor = 2.5 based on ultimate strength of connection. For use with beam flanges up to 3/4" thickness. Use with Channels P1000, P1100, P2000, P3000, P3300, P3301, P4000, P4001, P4100, and P4101.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Technical Description:
1000 lb Per Pair Load Capacity. For attaching support strut channel to beams, use only in pairs.
Right angle type, 3/4 inch max jaw capacity. Fittings unless noted, are made from hot-rolled, pickled and oiled steep plates, strip, or coil. The fitting steel also meets the physical requirements of ASTM A1011 SS GR 33. The pickling of the steel produces a surface that is smooth and free from scale.
UPC: 78636401214
Part Number: P2785
Notes:
Only use in pairs. Safety factor = 2.5 based on ultimate strength of connection. For use with beam flanges up to 3/4" thickness. Use with Channels P1000, P1100, P2000, P3000, P3300, P3301, P4000, P4001, P4100, and P4101.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Standard Dimensions:
- Hole Diameter: 9/16″
- Hole Spacing from End of Fitting: 13/16″
- Hole Spacing on Center: 1-7/8″
- Electrogalvanized (EG): Conforms to ASTM B633, Type III SC1
