Professional 1/4" Phone Plug (NP2X-B)
- Product SKU: NP2X-B
- Category: Connectors & Adapters, TS
The Neutrik NP2X-B Professional 1/4" Phone Plug sports a thin A-gauge 1/4" plug with a chuck-type strain relief. Its slimline shell features a width of 0.57” (14.5mm), and its one-piece tip contact— constructed without rivets—helps avoid common connection problems, such as hooking up in a socket or breaking off the tip.
This plug is suitable for guitar-connection applications, other audio cables, snakes, speakers, amplifiers, and mixing desks.
Features & Benefits
- Extra slim 1/4" plug for highest packing density
- Robust diecast shell in stylish design
- Proven chuck type strain relief for reliable cable retention
- Sleek design for best handling convenience
- Precision machined one-piece contacts - avoid hook up of tip contact
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
The Neutrik NP2X-B Professional 1/4" Phone Plug sports a thin A-gauge 1/4" plug with a chuck-type strain relief. Its slimline shell features a width of 0.57” (14.5mm), and its one-piece tip contact— constructed without rivets—helps avoid common connection problems, such as hooking up in a socket or breaking off the tip.
This plug is suitable for guitar-connection applications, other audio cables, snakes, speakers, amplifiers, and mixing desks.
Features & Benefits
- Extra slim 1/4" plug for highest packing density
- Robust diecast shell in stylish design
- Proven chuck type strain relief for reliable cable retention
- Sleek design for best handling convenience
- Precision machined one-piece contacts - avoid hook up of tip contact
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
| Product | |
| Title | NP2X-B |
| Connection Type | Plug |
| Gender | male |
| Electrical | |
| Contact resistance | depends on mating connector mΩ |
| Dielectric strength | 1 kVdc |
| Insulation resistance | > 2 GΩ (initial) |
| Rated current per contact | depends on mating connector A |
| Rated voltage | < 50 V |
| Mechanical | |
| Cable O.D. | 4 - 7 mm |
| Lifetime | > 1000 mating cycles |
| Wiresize | 1 mm² |
| Wiresize | 18 AWG |
| Wiring | Solder contacts |
| Material | |
| Bushing | Polyacetal (POM) + PU |
| Contact plating | 0.2 µm Au |
| Contacts | Brass (CuZn39Pb3) |
| Insert | Polyamide (PA 6.6 30 % GR) |
| Shell | Zinc diecast (ZnAl4Cu1) |
| Shell plating | Black chromium |
| Strain relief | Polyacetal (POM) |
| Environmental | |
| Standard compliance | IEC 60603-11 / EIA RS-453 |
| Solderability | Complies with IEC 68-2-20 |
| Temperature range | -20 °C to +65 °C |
