3-pin Male Panel Mount XLR Connector - Black (NC3MD-L-B-1)
- Product SKU: NC3MD-L-1-B
- Category: Connectors & Adapters, Termination & Testing, XLR, XLR Connectors
The NC3MD-L-B-1 Three-Pin Male XLR Connector from Neutrik is a 3-pole receptacle intended for soldering to studio-quality cables. It has been engineered for critical recording and broadcast applications. It features a zinc die cast shell, solder cups, and a 24mm D-size front-mounting panel-mount design. The connector utilizes a black metal housing and features gold contacts. The NC3MD-L-B-1 is a UL-recognized component.
Features & Benefits
- Robust "D" metal shell
- Standardized D sized 24 mm panel cutout
- Solder cups on 3 - 7 pole version
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
The NC3MD-L-B-1 Three-Pin Male XLR Connector from Neutrik is a 3-pole receptacle intended for soldering to studio-quality cables. It has been engineered for critical recording and broadcast applications. It features a zinc die cast shell, solder cups, and a 24mm D-size front-mounting panel-mount design. The connector utilizes a black metal housing and features gold contacts. The NC3MD-L-B-1 is a UL-recognized component.
Features & Benefits
- Robust "D" metal shell
- Standardized D sized 24 mm panel cutout
- Solder cups on 3 - 7 pole version
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
| Product | |
| Title | NC3MD-L-B-1 |
| Connection Type | XLR |
| Gender | male |
| Electrical | |
| Capacitance between contacts | ≤ 4 pF |
| Contact resistance | ≤ 5 mΩ |
| Dielectric strength | 1,5 kVdc |
| Insulation resistance | > 10 GΩ (initial) |
| Rated current per contact | 16 A |
| Rated voltage | < 50 V |
| Mechanical | |
| Insertion force | ≤ 20 N |
| Withdrawal force | ≤ 20 N |
| Lifetime | > 1000 mating cycles |
| Wiresize | |
| Wiring | Solder contacts |
| Locking device | Latch lock |
| Mounting direction | Front mounting |
| Chassis shape | D |
| Material | |
| Contact plating | 0.2 µm Au hard alloy over 2 µm Ni |
| Contacts | Brass (CuZn35Pb2) |
| Insert | Polyamide (PA 6.6 30 % GR) |
| Locking element | Steel Ck67 |
| Shell | Zinc diecast (ZnAl4Cu1) |
| Shell plating | Black chromium |
| Environmental | |
| Approvals | UL |
| Flammability | UL 94 HB |
| Standard compliance | IEC 61076-2-103 |
| Protection class | IP 40 |
| Solderability | Complies with IEC 68-2-20 |
| Temperature range | -30 °C to +80 °C |
