The powerCON TRUE1 TOP is a locking true mains connector. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Keyed for Power OUT, screw terminals, IP65, up to 16 A (USA: 20A)
The powerCON TRUE1 TOP is a single-phase connector with breaking capacity (CBC).
Features & Benefits
- IEC EN 60320-1, UL 60320-1 and C22.2 No. 60320-1:19 certified, thus accepted as a component for cord sets acc. to IEC 60799 / UL817 and equipment acc. to IEC 62368-1
- Unique NEUTRIK locking bushing and strain relief for cable diameters 6 mm to 12 mm (0.23 – 0.47 inches)
- Heavy duty sealed power connector for harsh and demanding environment
- Uses high impact UV-resistant materials
- Extremely robust and reliable cable retention
- Lockable, single phase connector with Circuit Breaking Capability (16A resp. 20 A 250 VAC)
- Superior NEUTRIK quality standard
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Technical Information
| Title |
NAC3MX-W-TOP |
| Connector series |
powerCON TRUE1TOP |
| Contact resistance |
≤ 2 mΩ |
| Dielectric strength |
4 kVdc / 2.8 kVac |
| Insulation resistance |
0,1 GΩ (after damp heat test IEC 68-2-30) |
| Number of electrical contacts |
2 + PE |
| Rating Europe |
EN 60320-1: 16 A 250 V AC |
| Rating USA |
UL 60320-1 & C22.2 No. 60320-1:19: 20 A 250 V AC |
| Cable O.D. |
6 - 12 mm (0.23 – 0.47 inches) |
| Lifetime |
> 5000 mating cycles |
| Wire size |
1.0 - 2.5 mm² |
| Wire size |
12 AWG |
| Contact plating |
2 µm Ag |
| Contacts |
CuNi1Si0.2 |
| Insert |
Polyamide (PA 6.6 30 % GR) |
| Locking element |
ZuAl4Cu1 |
| Shell |
Polyamide (PA 6.6 30 % GR) |
| Strain relief |
Polyacetal (POM) |
| Flammability |
UL 94 V-0 |
| Temperature range |
-30 °C - +80 °C |
