Locking 1/4" 3-Pole Female Phone-Cable Jack
- Product SKU: NJ3FC6-BAG
- Category: Connectors & Adapters, TRS
The NJ3FC6-BAG from Neutrik is a 3-pole locking 1/4" cable jack useful in effecting secure, in-line connections—particularly in situations where intermittent shocks or vibrations could cause a chance of accidental disconnections. Any plug will lock in automatically to this jack when connected, and will only unlock once you press the on-board red release tab. The jack features silver contacts with a black metal housing, and it can mate with all compatible mono and stereo plugs.
Features
- Secure locking cable jack
- Mates with all mono and stereo plugs specified per the EIA RS-453 standard (A-gauge)
- Robust metal shell for durability
- Neutrik cable retention and boot
- Solder terminals
- Black metal housing
- Silver contacts
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
The NJ3FC6-BAG from Neutrik is a 3-pole locking 1/4" cable jack useful in effecting secure, in-line connections—particularly in situations where intermittent shocks or vibrations could cause a chance of accidental disconnections. Any plug will lock in automatically to this jack when connected, and will only unlock once you press the on-board red release tab. The jack features silver contacts with a black metal housing, and it can mate with all compatible mono and stereo plugs.
Features
- Secure locking cable jack
- Mates with all mono and stereo plugs specified per the EIA RS-453 standard (A-gauge)
- Robust metal shell for durability
- Neutrik cable retention and boot
- Solder terminals
- Black metal housing
- Silver contacts
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
| Product | |
| Title | NJ3FC6-BAG |
| Connection Type | Jack |
| Gender | female |
| Electrical | |
| Contact resistance | < 6 mΩ (initial) |
| Dielectric strength | 1 kVdc |
| Insulation resistance | ≥ 1 GΩ @ 500 V dc |
| Rated current per contact | 10 A |
| Mechanical | |
| Cable O.D. | 3.5 - 8.0 mm |
| Insertion force | < 30 N |
| Withdrawal force | < 20 N |
| Lifetime | > 10000 mating cycles |
| Locking force | > 80 N |
| Wiresize | 1 mm² |
| Wiresize | 18 AWG |
| Wiring | Solder contacts |
| Locking device | Latch lock |
| Material | |
| Boot | Polyurethan |
| Contact plating | 2 µm Ag |
| Contacts | Brass (CuZn37) (Ground) |
| Insert | Polyamide (PA 6.6 30 % GR) |
| Shell | Zinc diecast (ZnAl4Cu1) |
| Shell plating | Black |
| Strain relief | Polyacetal (POM) |
| Environmental | |
| Standard compliance | EIA RS 453, IEC 60603-11 |
| Solderability | Complies with IEC 68-2-20 |
| Temperature range | -25 °C to +70 °C |
