Add the MXNet 1G Decoder/Receiver Device from AVPro Edge to your network to decode IP video for video walls, digital signage, or high-resolution monitoring. The decoder inputs up to 4K60 4:4:4 video from the MXNet switch or a multicast-capable L3 switch over Ethernet or via SFP fiber, and it decodes and outputs HDMI video up to 4K60 to a display. The receiver decodes IP video with near zero latency with a maximum 1 GB/s data rate, and it outputs visually lossless video.
The receiver/decoder fits right into the MXNet device ecosystem, and it can be configured and managed by the MXNet MENTOR control tool. Other features include EDID support, HDR and Dolby Vision support, DTS and Dolby audio support, a data status display, RS-232 and IR signaling pass-through support, USB and KVM support, and you can even turn off all the LED status lights on the unit, so it can be installed discreetly.
Resolution and HDR Metadata Management: Specify resolutions starting with 720p50, and up to 4K60. Using the MXNet Mentor software, you can specify whether you want to retain HDR metadata regardless of resolution.
Data Window: The Data Window displays the IP address and the MAC address, or you can modify the name, using MXNet Mentor to display custom names such as LG-OLED-TV, WEST-BAR-12, TW-PROJ-3, etc. You have up to 12 characters available to use for your custom name.
Full External Light Control: When you install an decoder in a discreet location, you have the option to turn off all the lights on the device, including network link lights and the Data Window OLED light. This way, the end-user will never even know it's there.
Control Signal Routing: Both RS-232 and IR signals can be direct routed from the AC-MXNET-1G-E encoder. When you route these signals through a network switch, you can specify which decoder to send these control signals.
USB and KVM Support: Each decoder unit has two USB ports, and you may also connect a USB hub if needed to expand the number of USB ports. Connect and route any USB signals back to the encoder host. Use the MXNet Mentor software to specify the host encoder, and the upstream USB device connected the selected decoder.