PATCH CORD, CAT6, CLEAR BOOT, 5' GN | LOW PROFILE, ASSEMBLED SNAG-FREE STRAIN RELIEF
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
ICPCST05GN

PATCH CORD, CAT6, CLEAR BOOT, 5' GN | LOW PROFILE, ASSEMBLED SNAG-FREE STRAIN RELIEF

The product is out of stock

Available: Out of Stock
$2.39
Successful pre-order.Thanks for contacting us!

ICC’s CAT6 unshielded twisted pair (UTP) patch cords exceed all performance requirements up to 550 MHz. They are ETL verified to ANSI/TIA-568-C.2 and UL listed. These patch cords are made from low-profile, snag-free boots for high-density applications. They are available in the most popular stock length and in a variety of colors to easily differentiate connection types.

Features

  • 100% Factory Tested, 50 Micro Inch Gold-plated contacts.
  • Low Profile boots for high-density applications.
  • No width wasted on boot.
  • Backward compatible with all lower rated category components.
  • Constructed with ultra flexible, EZ release, Snag Free Strain relief.
  • Stranded bare 24 AWG copper wire.
  • UL listed with 94V-0 rated plugs, CSA, CMG, FT4 Flame rated.

Specifications

Electrical/Physical:

Cable:

Operating Temperature -20°C to 80°C

Velocity of Proportion NOM 67%

Capacitance, Mutual 14.5 PF/FT at 1 MHz

Dielectric withstands, min 1500V RMS

D.C Resistance, max 93.2 ohms/km at 20°C

Impedance, Characteristic, NOM 100.0 OHMS

±15 at 1 to 100 MHz

±20 at 100 to 350 MHz

Modular Plug:

UL Applications: 250 Volts max, at 2 AMPS

Resistance of Insulation: 500 Megaohms

Resistance of Termination: 35 Milliohms max at -40°C to -70°C

Dielectric Withstanding Voltage: 500 Volts AC

Material and Finish:

Cable: CAT6 Patch Cable

Jacket: Material: PVC

Overall Diameter: 0.250″ max

Average Thickness: 0.020″

Insulation: Material: High-Density Polyethylene

Overall Diameter: 0.038″

Average Thickness: 0.007″

Conductor: 24 AWG (7×32) UL Rated, Bare Copper Wire, Stranded

Performance Rating: CAT6

Modular Plug with Loading Bar: UL and cUL Recognized

Housing: Polycarbonate, UL 94V-0

Color: Clear

Contact: Phosphor Bronze, 0.014 inch thick

Gold Plating: 1.27 microns/50 micro inch min on contacts

No. of contacts: 8

Strain Relief Boot:

Material: 70P PVC

Mechanical:

Cable to Plug Tensile strength: 20 lbs (89N) min

Durability: 200 mating cycles min

ICC’s CAT6 unshielded twisted pair (UTP) patch cords exceed all performance requirements up to 550 MHz. They are ETL verified to ANSI/TIA-568-C.2 and UL listed. These patch cords are made from low-profile, snag-free boots for high-density applications. They are available in the most popular stock length and in a variety of colors to easily differentiate connection types.

Features

  • 100% Factory Tested, 50 Micro Inch Gold-plated contacts.
  • Low Profile boots for high-density applications.
  • No width wasted on boot.
  • Backward compatible with all lower rated category components.
  • Constructed with ultra flexible, EZ release, Snag Free Strain relief.
  • Stranded bare 24 AWG copper wire.
  • UL listed with 94V-0 rated plugs, CSA, CMG, FT4 Flame rated.

Specifications

Electrical/Physical:

Cable:

Operating Temperature -20°C to 80°C

Velocity of Proportion NOM 67%

Capacitance, Mutual 14.5 PF/FT at 1 MHz

Dielectric withstands, min 1500V RMS

D.C Resistance, max 93.2 ohms/km at 20°C

Impedance, Characteristic, NOM 100.0 OHMS

±15 at 1 to 100 MHz

±20 at 100 to 350 MHz

Modular Plug:

UL Applications: 250 Volts max, at 2 AMPS

Resistance of Insulation: 500 Megaohms

Resistance of Termination: 35 Milliohms max at -40°C to -70°C

Dielectric Withstanding Voltage: 500 Volts AC

Material and Finish:

Cable: CAT6 Patch Cable

Jacket: Material: PVC

Overall Diameter: 0.250″ max

Average Thickness: 0.020″

Insulation: Material: High-Density Polyethylene

Overall Diameter: 0.038″

Average Thickness: 0.007″

Conductor: 24 AWG (7×32) UL Rated, Bare Copper Wire, Stranded

Performance Rating: CAT6

Modular Plug with Loading Bar: UL and cUL Recognized

Housing: Polycarbonate, UL 94V-0

Color: Clear

Contact: Phosphor Bronze, 0.014 inch thick

Gold Plating: 1.27 microns/50 micro inch min on contacts

No. of contacts: 8

Strain Relief Boot:

Material: 70P PVC

Mechanical:

Cable to Plug Tensile strength: 20 lbs (89N) min

Durability: 200 mating cycles min

  • PROCRAFT Supply is here to help

    If you don't see what you are looking for please contact us at our toll free number: 888 587-5540

    We want to help in any way we can! You can also contact us via email at shop@procraftsupply.com