Description
The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Color coded for easy identification, powerCON offers power-in (blue) and power-out (gray) versions with different keying to avoid the possibility of short circuiting. The contacts are designed to prevent damage from arcing when disconnected while under load. powerCON meets or exceeds the demands of applications in the fields of A/V usages, test and measurement equipment, computers or industrial designs. UL, cUL recognized components, VDE certified, SEV approved. Rated at 20A/250VAC.
Attention:
The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!
Features & Benefits
-
Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
-
Fast and easy twist lock latching system
-
Extremely robust and reliable
-
Ergonomic design
-
Unique Neutrik chuck type strain relief
-
Improved kink protection by two-component bushing
-
UL, cUL recognized components
VDE certified
SEV approved -
Branded with unique hologram - guarantees genuine and authentic Neutrik product
WARNING:
This product can expose you to chemicals which are known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Neutrik powerCON Technical Information
Product | |
Title | NAC3FCA |
Gender | female |
Electrical | |
Contact resistance | ≤ 3 mΩ |
Dielectric strength | 4 kVdc / 2.8 kVac |
Insulation resistance | > 0.1 GΩ (after damp heat test IEC 68-2-30) |
Number of electronical contacts | 2 + PE |
Rated current per contact | 20 A rms |
Rated voltage | 250 V ac |
Mechanical | |
Cable O.D. | 6 - 15 mm (1) |
Lifetime | > 1000 mating cycles |
Wiresize | 2,5 mm² |
Wiresize | 14 AWG |
Locking device | Quick Lock |
(1) | Cable O.D. range limited to 6 mm - 14 mm acc. VDE |
Material | |
Contact plating | 4 µm Ag |
Contacts | Bronze (CuSn6) |
Insert | Polyamide (PA 6 30 % GR) |
Locking element | Zinc diecast (ZnAl4Cu1) |
Shell | Polyamide (PA 6 30 % GR) |
Strain relief | Polyacetal (POM) |
Environmental | |
Temperature range | -30 °C to +80 °C |